PTFE powder can be used alone as a solid lubricant, it can be used as plastics, rubber, paint, ink, oil, grease and other additives. Available for a variety of typical powder processing methods, such as plastic or rubber blend when mixed with an amount of 5 to 20 percent, adding PTFE powder in oil and fats, can reduce the friction coefficient, just add percent a few, it can increase the life of the lubricant. Its organic solvent dispersion of the release agent can be made. I plant self-developed -B01 is obtained by a special synthetic low molecular weight PTFE polymer powder. Add to suit all kinds of engineering plastics, non-stick coatings, coil coatings, powder coatings, inks, lubricants, grease them. After the characteristics and advantages 1, add the B01, can reduce the friction coefficient and improve the anti-abrasion resistance and scratch resistance, lower surface energy, increase non-sticky. Improve the resin chemical resistance and temperature resistance. 2, B01 particle size of micron level, are particularly vulnerable to disperse, effectively improve the efficiency and reduce the usage, thereby reducing the overall cost. 3, transport and storage easier 4, an appropriate increase in the physical properties of the resin 5, 6 thermal stability, good chemical resistance ___________________________________________________ Technical indicators B01: No. | Item Unit Index value 1 | Appearance White fine powder 2 | moisture % ≤ 0.03 3 | The average particle size D50 μm ≤20 4 | Tensile strength Mpa 8.0 5 | elongation at break of 60% 6 | Apparent density g / cm2 0.56 g / cm2 7 | TGA% Wt ≤ 0.2 8 | Resistance corrosive unchanged 9 | molecular weight 10000-30000 10 | melting point ℃ 327 ± 5 11 | decomposition temperature ℃ 430 12 | melt viscosity Pa.S 102∽106 13 | 100% 100% purity ___________________________________________________ Price: 98 yuan / kg Packing : 25 kg / barrel